fizi Save an extra 40% on Neewer 18-inch LED Ring Light with Stand and 2.4G Wireless Remote, 55W 3200K-5500K Makeup Ringlight with Soft Tube/Phone Holder/Ball Head for Vlogging Selfie Video Shooting, Support USB Charge with this coupon code. This coupon code valid through September 04, 2020 or while supplies last on Amazon. Discount applies at checkout.
Coupon Price : $71.99
INSTALLATION OF LIGHT STAND
1. Light Stand Position: At the extreme BOTTOM of the box
2. Folded stand is placed at the bottom box of the package. Take it out.
3. Loosen the fixing screw knob.
4. Hold the middle pole of the light stand with one hand and pull out the stand legs
with the other hand
5. Adjust the stand legs to the angle you want.
6. Fix the 3 legs stably
7. Loosen the screw knob on the middle pole to extend the light stand to the height you want.
8. Tighten the screws to fix it.
!-Too much force without loosing the knob (Pic) will easily hurt yourself. Please pay much attention to this point to avoid injury.
LIGHTWEIGHT DURABLE STABLE Easy to Adjust & Carry
- 18″/44.5cm
- 12.7″/32.5cm
PROVIDE PERFECT LIGHTING EFFECT
1-MANUAL ADJUSTMENT
- ADJUSTMENT BRIGHTNESS BUTTON
- ADJUSTMENT TEMPERATURE BUTTON
REMOTE ADJUSTMENT
- ADJUSTMENT BRIGHTNESS BUTTON
- ADJUSTMENT TEMPERATURE BUTTON
CONVENIENT REMOTE CONTROL Control Brightness & Color Temperature of Ring Lights
OPERATION INSTRUCTIONS:
Code Pairing: The lamp can be remote-controlled after code pairing with the remote controller. Up to 4 pair codes can be stored for each lamp, and the earliest one will be overwritten when the number of paring codes exceeds 4.
Turn off the lamp power or wall switch then turn on. Within 30 seconds after the lamp is turned on, hold the “ON” button on the remote controller for 3-5 seconds. The lamp will flicker for 3 times, indicating the success of pairing
Code Clearing:The remote control relationship between the controller and the corresponding lamp will be removed after code clearing.
Turn off the lamp power or wall switch, then turn on. Within 30 seconds after the lamp is turned on, hold the “OFF” button on the remote controller for 3-5 seconds. The lamp will flicker for 3 times, indicating the success of unpairing.
Resume to Default Settings:
Turn off the lamp power or wall switch, then turn on. Repeat until the power is on for the 4th time. The lamp will flicker for 3 times, indicating the lamp has been resumed to default settings, and all pair codes has been removed.
- Brightness Increment Button
- Brightness Decrement Button
- Color Temperature increment Button
- Color Temperature Decrement Button
- Power on Button
- Power off Button
EASY TO USE Bluetooth Connectivity
SUPPORT USB OUTPUT It supports charging your smartphone while shooting/streaming. No need to worry about phone’s power running out
- DSLR Camera
- 360° Rotatable
- Mobile Phone
SOFT TUBE The soft tube makes the light rotate freely for the best position
- PORTRAIT
- LIVE STREAMING
- MAKE UP
- SELF-PORTRAIT
APPLIED ON VARIOUS OCCASIONS – Perfect for Makeup/Selfie/Portrait Studio Photography/Live Stream/etc
NOTE: ONLY SMARTPHONE RING LIGHT KIT IS FOR SALE
