PandaRC VT5804_AIR FPV VTX Banggood Coupon Promo Code

Code Expired
15% off PandaRC VT5804_AIR 5.8GHz 40CH 0/25/50/100/200/400mW FPV Transmitter Triangle...More

15% off PandaRC VT5804_AIR 5.8GHz 40CH 0/25/50/100/200/400mW FPV Transmitter Triangle VTX Support OSD For RC Racer Drone Banggood Coupon Promo Code

Banggood Coupon Price :$15.90

Banggood Regular Price : $18.7 Your Save : $2.80 Coupon Limit: 100 times Expires : February 17, 2020

CONTROL METHODS
1): Smart Audio configuration.
2): Select Channel: short press,change the CH (CH1-CHS).
3): Select FR: Press 3 seconds, when C4 flashing others light turn out,then short press to change FR.
4): Select power : Press 6seconds,when R flashing,other light turn out, then short press again to change the power 25mW/100mW/200mW/400mW
(As the below picture of Power switchable).

The selections in orange requires HAM License to operate legally

2. Channel, Frequency and Output Power controlled through OSD Configuration

1): Hardware line connection:Connect Video transmitter RX to Free Uart(TX) interface of flight control hardware,
2): Ground station software configuration:Select the ports,reference below picture, set peripherals menu as the corresponding port.

The “5V Vout” is only used for camera power supply. Connecting to the power input can cause serious faults.

Matters need attention
1) Please confirm assemble the antenna before your plug power, in case destroy internal component.
2) Please assure operating voltage range is right, d.c positive and negative poles are right too, or it would be destroy internal component.
3) Please use better VSWR and gain of antenna when you need to change for long distance.
4) Please do not touch the transmitter after long flying, in case get hurt by high temperature.
5) Please pay attention to electrostatic protection when transmitting and assembling. Less